[email protected] Trigno™ 4-Channel FSR Adapter 2020-03-24T21:38:47-04:00 Trigno 4-Channel FSR Adapter.
Designed to provide relative pressure information of body-contact surfaces.
Each sensor transmits 4 independent analog signals, .
Each servicing an individual FSR (Force Sensitive Resistor) membrane
These thin membranes are often affixed to shoe inserts for recording foot pressure timing at the heel, the toe, the first and the fifth metatarsals.
Alternatively, these same sensors can be used to assess grip force during grasping tasks, or pressure distribution on the back while seated or lying down.
Specifications Book a Demo Identify the timing of significant events
Make relative amplitude comparisons .
Available sizes: 0.2” circle diameter, 0.5” circle diameter and 1.5” square.
Up to 40 m range.
2.4 GHz transmission .
User’s Guide Sensor Channels 4x FSR, up to 6x IMU Size (Body) 27 x 46 x 13 mm Mass 19 g Operating Range 40 m in RF mode Host Dependent/unlimited datalogger Wireless Protocol -2.400-2.483 GHz ISM Band, Proprietary RF Protocol -BLE V4.2 FSR Bandwidths DC-50 Hz FSR Sampling Rate (Max) 1111 sa/sec Accelerometer Sampling Rate (Max) 741 sa/sec Gyroscope Sampling Rate (Max) 741 sa/sec Orientation Sampling Rate (Max) 74 sa/sec Sensor Resolution 16 bits Battery Life Up to 8 hours Recharge Time (typical) 2.5 hours Inter-Sensor Latency < 1 sampling period EMG Analog Output Delay 48 ms Fixed ACC/Gyro Analog Output Delay 96 ms Fixed Real-Time IMU Orientation Filter Quaternions or RPY (selectable) Material Medical Grade Polycarbonate Seal and Protection UV-sealed to prevent moisture from entering the sensor & to enhance patient safety Patents Protected by one or more of the following Patents 6480731, 6238338, 6440067, 9351559, 8971983, EP1070479 Systems Integration Quote Request Contact Us Shop Supplies.